Difference between revisions of "Terrain Elevation view/es"

From Air Navigation User Manuals
Jump to navigation Jump to search
(Created page with "Gráfico de elevación")
 
(Created page with "<br /> ---- Si los datos de elevación de su región están instalados, el gráfico de elevación exhibirá la información del terreno. Note que SÓLO se mostrará dicha info...")
Line 2: Line 2:
 
<br />
 
<br />
 
----
 
----
−
If the elevation data is installed for your region, the elevation graph will display terrain information. Note that you will show data information ONLY after downloading «Free Elevation data» files or «3D data» files from the <u>[[Map Store|«Map Store».]]</u>
+
Si los datos de elevación de su región están instalados, el gráfico de elevación exhibirá la información del terreno. Note que SÓLO se mostrará dicha información luego de descargar los archivos  «Free Elevation data» o «3D data» desde el <u>[[Map Store|«Map Store».]]</u>
−
The difference between each is that the former may have inaccuracies and the latter is more precise and complete.
+
La diferencia entre cada tipo de data es que la primera puede llegar a presentar errores menores, mientras que la segunda es mucho más precisa y completa.
  
 
In «Flight mode», it will display the terrain in front of the aircraft, updating the view every 5 seconds, the terrain view can be zoomed to display 10 NM to 50 NM of terrain elevation. The
 
In «Flight mode», it will display the terrain in front of the aircraft, updating the view every 5 seconds, the terrain view can be zoomed to display 10 NM to 50 NM of terrain elevation. The

Revision as of 14:17, 26 October 2015

Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎português



Si los datos de elevación de su región están instalados, el gráfico de elevación exhibirá la información del terreno. Note que SÓLO se mostrará dicha información luego de descargar los archivos «Free Elevation data» o «3D data» desde el «Map Store». La diferencia entre cada tipo de data es que la primera puede llegar a presentar errores menores, mientras que la segunda es mucho más precisa y completa.

In «Flight mode», it will display the terrain in front of the aircraft, updating the view every 5 seconds, the terrain view can be zoomed to display 10 NM to 50 NM of terrain elevation. The maximum reported altitude will be displayed in the top left corner of the elevation view. A symbol representing your aircraft will be displayed in the view with a red dashed line, representing your current altitude, as reported by the GPS.

In «Edit mode», it will display the terrain between the two waypoints of the selected leg. This is very useful when planning your route, to get an estimate of the minimum safe altitude.

Please note that even with a good GPS signal, the altitude as reported by the GPS may have an accuracy of +/- 200 ft. Elevation database may also contains some inaccuracies. You should always plan your flight with a reasonable margin over the obstacles.

Altitud.jpg

Note 1: The «3D data» includes all the terrain information with better accuracy than the one from the «Free Elevation data». It`s more complete and it works for both the terrain profile graph and the «3D EFIS» module (for more info refer to the «3D EFIS module» chapter).

Note 2: Remember that you can activate the Airspace view in the Elevation Graph from the menu «Map options», then looking for the option under «Airspaces» section. The Elevation Graph should look like the following screenshot shows.

Terrain.jpg



Back to index