Difference between revisions of "Terrain Elevation view/es"
(Created page with "<br /> ---- Si los datos de elevación de su región están instalados, el gráfico de elevación exhibirá la información del terreno. Note que SÓLO se mostrará dicha info...") |
(Created page with "En el modo «Modo de Vuelo», se exhibirá el terreno en frente del avión, actualizando la vista cada 5 segundos. Se puede hacer zoom en la vista del terreno con el fin de mo...") |
||
| Line 5: | Line 5: | ||
La diferencia entre cada tipo de data es que la primera puede llegar a presentar errores menores, mientras que la segunda es mucho más precisa y completa. | La diferencia entre cada tipo de data es que la primera puede llegar a presentar errores menores, mientras que la segunda es mucho más precisa y completa. | ||
| − | + | En el modo «Modo de Vuelo», se exhibirá el terreno en frente del avión, actualizando la vista cada 5 segundos. Se puede hacer zoom en la vista del terreno con el fin de mostrar desde 10 hasta 50 millas náuticas de la zona de elevación del terreno. La máxima altitud captada por el GPS será desplegada en le esquina superior izquierda de la vista de elevación del terreno. Un símbolo representando su avión será mostrado en la vista con una línea punteada roja. Ésta simboliza su altitud actual (reportada por el GPS) | |
| − | |||
| − | |||
In «Edit mode», it will display the terrain between the two waypoints of the selected leg. This is very useful when planning your route, to get an estimate of the minimum safe altitude. | In «Edit mode», it will display the terrain between the two waypoints of the selected leg. This is very useful when planning your route, to get an estimate of the minimum safe altitude. | ||
Revision as of 14:17, 26 October 2015
Si los datos de elevación de su región están instalados, el gráfico de elevación exhibirá la información del terreno. Note que SÓLO se mostrará dicha información luego de descargar los archivos «Free Elevation data» o «3D data» desde el «Map Store». La diferencia entre cada tipo de data es que la primera puede llegar a presentar errores menores, mientras que la segunda es mucho más precisa y completa.
En el modo «Modo de Vuelo», se exhibirá el terreno en frente del avión, actualizando la vista cada 5 segundos. Se puede hacer zoom en la vista del terreno con el fin de mostrar desde 10 hasta 50 millas náuticas de la zona de elevación del terreno. La máxima altitud captada por el GPS será desplegada en le esquina superior izquierda de la vista de elevación del terreno. Un símbolo representando su avión será mostrado en la vista con una línea punteada roja. Ésta simboliza su altitud actual (reportada por el GPS)
In «Edit mode», it will display the terrain between the two waypoints of the selected leg. This is very useful when planning your route, to get an estimate of the minimum safe altitude.
Please note that even with a good GPS signal, the altitude as reported by the GPS may have an accuracy of +/- 200 ft. Elevation database may also contains some inaccuracies. You should always plan your flight with a reasonable margin over the obstacles.
Note 1: The «3D data» includes all the terrain information with better accuracy than the one from the «Free Elevation data». It`s more complete and it works for both the terrain profile graph and the «3D EFIS» module (for more info refer to the «3D EFIS module» chapter).
Note 2: Remember that you can activate the Airspace view in the Elevation Graph from the menu «Map options», then looking for the option under «Airspaces» section. The Elevation Graph should look like the following screenshot shows.
Back to index

